mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07 0.25-3.0 ghz high dynamic range amplifier page 1 of 10 features circuit description functional block diagram cmm6004-sc 0.25 to 3.0 ghz frequency range 41 dbm output ip3 2.1 db noise figure 14.5 db gain 23.5 dbm p1db sot-89 smt package single power supply +3v to +5v voltage rail the cmm6004-sc is a high dynamic range amplifier designed for applications operating within the 0.25 to 3.0 ghz frequency range. it is an ideal solution for transmit and receive functions where high linearity is required. the amplifier has the flexibility of being optimized for a number of wireless applications. the combination of low nf and high ip3 at the same bias point make it an ideal transmit or receive solution when used in applications including cellular and pcs (personal communications service) operating from 0.8 to 2.2 ghz; mmds (multichannel multipoint distribution systems) operating from 2.2 to 2.7 ghz; and wlan (wireless lan) operating at 2.4 ghz. the cmm6004-sc is packaged in a low-cost, space efficient, surface mount sot-89 package which provides excellent electrical stability and low thermal resistance. all devices are 100% rf and dc tested. input ground output bias ground 1 2 3 4 supply voltage rf input power* storage temperature (tstg) junction temperature operating temperature thermal resistance +6.0 v +20 dbm -55 oc to +125 oc 150 oc -40 oc to +85oc 52 oc/w absolute maximum ratings operation of this device above any of these parameters may cause damage. *operation with more than 10 dbm of input power may cause 2 db degradation in oip3 performance. parameter condition min typ max units frequency range 0.25 3.0 ghz gain externally matched 13.5 14.5 db input return loss externally matched -10 db output ip3 +38 +41 dbm noise figure 2.1 db output p1db 23 dbm operating current range 120 150 180 ma supply voltage 5.0 v unless otherwise specified, the following specifications are guaranteed at room temperature in a mimix fixture. notes: 1. t = 25oc, vdd = 5.0, frequency = 800 mhz, 50 ohm system 2. oip3 measured with two tones at output power of 5 dbm/tone separated by 10 mhz. electrical characteristics (t=25oc) frequency range 900 1900 2400 mhz gain 16.5 14.5 13.6 db input return loss -18 -15 -15 db output return loss -14 -10 -12 db output ip3 +41.5 +41.0 +41.0 dbm output p1db 23.8 23.5 23.0 dbm noise figure 1.8 2.2 2.3 db 1. typical values reflect performance in recommended application circuit. typical parameters parameter typical units
0.25-3.0 ghz high dynamic range amplifier page 2 of 10 typical performance cmm6004-sc mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07
0.25-3.0 ghz high dynamic range amplifier page 3 of 10 application circuit - 900 mhz cmm6004-sc typical performance (50 ohm system) ref designator value description size c1, c2 56 pf mch185a560jk 0603 l1 12 nh toko ll1608-f12nk 0603 l2 47 nh toko ll1608-f47nk 0603 s-parameters vs frequency 20 10 0 -10 -20 -30 0.1 1.1 2.1 3.0 frequency, ghz magnitude, db s21 s11 s22 frequency 900 mhz gain 16.5 db input return loss -18.0 db output return loss -14.0 db oip3 41.0 dbm noise figure 1.8 db drain current id = 173 ma p1db 23.8 dbm 5v 900 mhz 16.2 db -19.0 db -16.0 db 38.0 dbm 1.8 db id = 173 ma 18.5 dbm 3.3v uuuu l1 12 nh rf in cmm6004-sc sot-89 t = 80 mil input matching network rf out uuuu c2 56 pf l2 47 nh vcc 5v c1 56 pf t = 70 mil t = 500 mil mimix mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07
0.25-3.0 ghz high dynamic range amplifier page 4 of 10 typical performance over voltage cmm6004-sc cmm6004-sc evaluation board @ 900mhz s21 over voltage 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 freq (ghz) s21 (db) 4v 3v 2v cmm6004-sc evaluation board @ 900mhz s11 over voltage -30 -20 -10 0 10 20 30 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 freq (ghz) s11 (db) 4v 3v 2v cmm6004-sc evaluation board @ 900mhz s22 over voltage -30 -25 -20 -15 -10 -5 0 5 10 15 20 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 freq (ghz) s22 (db) 4v 3v 2v ccmm6004-sc evaluation board @ 900mhz p1db over voltage 12 14 16 18 20 22 24 26 1.5 2 2.5 3 3.5 4 4.5 5 5.5 voltage (v) power (dbm) ccmm6004-sc evaluation board @ 900mhz oip3 over voltage 20.0 22.0 24.0 26.0 28.0 30.0 32.0 34.0 36.0 38.0 40.0 42.0 44.0 46.0 48.0 50.0 1.5 2 2.5 3 3.5 4 4.5 5 5.5 voltage (v) oip3 (dbm) mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07
0.25-3.0 ghz high dynamic range amplifier page 5 of 10 distribution charts @ 3.3v cmm6004-sc idss @ 3.3v gain @ 3.3v p1db @ 3.3v oip3 @ 3.3v note: sample size is 250 samples taken from 3 different wafer lots. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07
0.25-3.0 ghz high dynamic range amplifier page 6 of 10 application circuit - 1900 mhz cmm6004-sc typical performance (50 ohm system) frequency 1900 mhz gain 14.5 db input return loss -15 db output return loss -10 db oip3 41.0 dbm noise figure 2.2 db bias vds = 5v, id = 174 ma p1db 23.5 dbm 20 10 0 -10 -20 -30 0 0.5 1.0 1.5 2.0 2.5 3.0 frequency, ghz magnitude, db s-parameters vs frequency s21 s11 s22 rf out uuuu uuuu c3 56 pf l3 47 nh vcc 5v c2 56 pf l2 6.8 nh rf in cmm6004-sc sot-89 t = 70 mil input matching network c1 2.2 pf t = 70 mil uuuu l1 2.7 nh t = 80 mil t = 80 mil t = 500 mil ref designator value description size c1 2.2 pf koa 2.2pf 50v cer 0603 cap 0603 npo .25pf c2, c3 56 pf mch185a560jk 0603 l1 2.7 nh toko ll1608-f2n7s 0603 l2 6.8 nh toko ll1608-f6n8k 0603 l3 47 nh toko ll1608-f47nk 0603 mimix mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07
0.25-3.0 ghz high dynamic range amplifier page 7 of 10 application circuit - 2400 mhz cmm6004-sc typical performance (50 ohm system) frequency 2400 mhz gain 13.6 db input return loss -15 db output return loss -12 db oip3 41.0 dbm noise figure 2.3 db bias vds = 5v, id = 175 ma p1db 23.0 dbm 20 10 0 -10 -20 -30 0 0.5 1.0 1.5 2.0 2.5 3.0 frequency, ghz magnitude, db s21 s11 s22 s-parameters vs frequency rf out uuuu uuuu c3 56 pf l3 47 nh vcc 5v c2 56 pf l2 6.8 nh rf in cmm6004-sc sot-89 t = 70 mil input matching network c1 1.2 pf t = 70 mil uuuu l1 2.2 nh t = 80 mil t = 80 mil t = 500 mil ref designator value description size c1 1.2 pf phyc 1.2pf 50v cer 0603 cap 0603 npo .25pf c2, c3 56 pf mch185a560jk 0603 l1 2.2 nh toko ll1608-f2n2s 0603 l2 6.8 nh toko ll1608-f6n8k 0603 l3 47 nh toko ll1608-f47nk 0603 mimix mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07
0.25-3.0 ghz high dynamic range amplifier page 8 of 10 typical scattering parameters cmm6004-sc (vds = +5v, ids = 150 ma, t = 22oc, unmatched device in a 50 ohm system) frequency s 11 s 21 s 12 s 22 (mhz) (mag) (ang) (mag) (ang) (mag) (ang) (mag) (ang) 300 0.337 -47.270 7.379 157.500 0.066 -3.397 0.067 -164.10 400 0.349 -58.240 7.259 151.400 0.066 -6.123 0.064 -173.50 500 0.363 -68.990 7.127 145.300 0.066 -8.429 0.062 -179.70 600 0.379 -79.290 6.986 139.300 0.066 -10.740 0.060 -173.90 700 0.396 -89.000 6.829 133.300 0.065 -12.900 0.059 -169.10 800 0.413 -98.120 6.666 127.400 0.065 -14.990 0.057 -165.00 900 0.430 -106.700 6.502 121.600 0.065 -16.990 0.055 -161.60 1000 0.447 -114.700 6.330 115.900 0.065 -18.970 0.053 -158.60 1100 0.467 -122.400 6.162 110.300 0.065 -20.840 0.052 -155.50 1200 0.475 -129.600 5.991 104.900 0.065 -22.900 0.049 -152.50 1300 0.490 -136.500 5.820 99.610 0.065 -24.660 0.047 -150.10 1400 0.502 -143.100 5.655 94.400 0.065 -26.510 0.046 -147.00 1500 0.513 -149.400 5.494 89.350 0.064 -28.490 0.044 -144.30 1600 0.524 -155.500 5.339 84.370 0.064 -30.130 0.042 -141.50 1700 0.534 -161.400 5.189 79.490 0.064 -32.120 0.041 -138.80 1800 0.543 -167.100 5.045 74.690 0.064 -34.010 0.040 -136.00 1900 0.551 -172.60 4.906 69.960 0.064 -35.800 0.039 -133.00 2000 0.559 -178.000 4.775 65.320 0.064 -37.620 0.038 -130.00 2100 0.565 176.800 4.647 60.730 0.064 -39.550 0.037 -127.20 2200 0.571 171.500 4.523 56.180 0.064 -41.370 0.037 -124.10 2300 0.577 166.400 4.402 51.720 0.064 -43.200 0.036 -119.80 2400 0.582 161.400 4.289 47.320 0.064 -45.090 0.035 -116.00 2500 0.588 156.500 4.183 42.960 0.064 -46.900 0.036 -111.50 2600 0.539 151.600 4.081 38.610 0.065 -48.790 0.035 -106.20 2700 0.597 146.800 3.983 34.330 0.065 -50.760 0.035 -101.30 2800 0.600 142.000 3.886 30.050 0.065 -52.670 0.036 -95.96 2900 0.605 137.200 3.795 25.810 0.065 -54.540 0.037 -90.92 3000 0.608 132.500 3.706 21.620 0.065 -56.660 0.038 -85.54 s-parameter data files are available online at www.mimixbroadband.com. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07
0.25-3.0 ghz high dynamic range amplifier page 9 of 10 physical dimensions cmm6004-sc 123 4 di m e ns io ns i n m illi m ete rs [i n che s ] 4.50 [0.177] 1.73 [0.068] 0.46 [0.18] 3x 1.50 [0.059] 3.00 [0.118] 0.76 [0.030] 0.38 [0.015] 0.38 [0.015] 4.41 [0.163] 1.55 [0.061] 2.50 [0.096] 0.71 [0.028] 0.99 [0.039] 0.58 [0.023] 0.64 [0.025] 0.86 [0.034] 1.27 [0.050] 3.48 [0.137] 5.33 [0.210] 3.86 [0.152] 1.70 [0.067] 2.06 [0.081] 0.41 [0.016] mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07 xxxxp aaaaaaa cyyww ?xxxx? = part number (4 chars max) ?aaaaaaa? = lot-wafer number (7 chars max) ?c? = country of origin (1 char) ?yyww? = date stamp (year-year-week-week) ?p? = plating option (1 char) example: base part #: 6004 lot-wafer #: 5010 plating option: g (matte tin) date code: 2007, week 1 country of origin: philippines 6004g 5010 p0701
0.25-3.0 ghz high dynamic range amplifier page 10 of 10 cmm6004-sc handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. care should be taken not to apply heavy pressure to the top or base material to avoid package damage. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matt tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) ?pb free? processes. ordering information the cmm6004-sc is available in a surface-mount sot-89 package and devices are available in tape and reel. part number for ordering description cmm6004-sc-0g00 cmm6004-sc-0g0t matte tin finished rohs compliant sot-89 surface-mount power package in bulk quantity matte tin finished rohs compliant sot-89 surface-mount power package in tape and reel pb-cmm6004-sc-00a0 evaluation board with sma connectors for cmm6004-sc matched at 900 mhz PB-CMM6004-SC-00B0 evaluation board with sma connectors for cmm6004-sc matched at 1900 mhz pb-cmm6004-sc-00c0 evaluation board with sma connectors for cmm6004-sc matched at 2400 mhz we also offer the plastic package with snpb (tin-lead) or nipdau plating. please contact your regional sales manager for more information regarding different plating types. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. january 2007 - rev 15-jan-07
|
